REMI Stability Chambers are designed as per ICH Guidelines for precise monitoring of temperature and humidity conditions required for the long term, intermediate & accelerated stability studies at chemical, pharmaceutical, agrochemical manufacturing facilities. These chambers are manufactured to comply with GMP requirements.
SALIENT FEATURES
- Fulfills storage conditions of 25°C “ 60% RH, 40°C “ 75% M RH, 30°C “ 65% RH, 25°C “ 40% RH
- Precise monitoring of temperature and humidity conditions
- The unique design of the thermal barrier for better energy efficiency
- Machine filled PUF insulation to eliminate void pockets
- Powerful fan motor for forced air circulation to maintain uniform conditions inside the chamber within permissible limit Heating by long-life SS tubular heaters
- Hermetically sealed Compressor with CFC free refrigerant
- Chamber calibration port on the side
- Adjustable trays
- Output for remote alarm
- Microprocessor controller with LCD display & capacitance type sensor
- 4 ” attractive LCD display for direct display of humidity & temperature
- Auto tuning of controller
- Battery Backup for Controller
- Settable High / low alarm points
- Centronic interface to record Temperature, Humidity, Date & Time by attaching Dot Matrix printer with adjustable print interval
- REMI ‘Datasoft’ data acquisition software complying to 21 CFR part 11 as per USFDA Guidelines (Optional)
- Power failure and resumption recorded with date and time
- PC communication through RS “ 485 with data acquisition software
- High-temperature safety cut off & alarms for high/low set parameters
- Low water level alarm and power cutoff of boiler tank heater
- Time delay for compressor switch on
- Overload cut off relay for compressor
- Rounded inner chamber for easy cleaning
- Auto door closer
- Attractive door profile
- Data logger for 8 points (4+4) temperature/humidity recording with the sensor, printer interface and software (Optional)
- Optional
- Touch screen display ( TFT ) with additional features(Details overleaf)
- Validation protocol with IQ, OQ, PQ Documentation
TOUCH SCREEN DISPLAY
- 7-inch big color touch screen
- PLC (Programmable logic controller)
- The memory of 10,000 records
- Centronic interface to record Temperature, Date & Time by attaching Dot Matrix printer with adjustable print interval
- PC communication through REMI Datasoft
- Ethernet port
- Battery backup in case of power failure for display, alarms & off-line data logging (optional)
- Programmable cyclic timer for controlling illumination conditions
REMI ‘DATA SOFT’
- Multiple level alphanumerical passwords with password aging
- Secured audit trail report
- Alarm report with mention of the alarm condition
- Mean Kinetic Temperature able to be calculated for any days & alarm deviation report
- Reports in graphical and tabular form
- Data Stored in PC server with Lan connectivity and can be monitored on PC with password authentication
- Multi-chamber data acquisition on a single software
- Communication through RS 485 / TCP IP
- GSM Mobile Alert for six Numbers
OPTIONAL ACCESSORIES
To be Ordered separately
- Data logger for 8 / 16 Point temperature & Humidity recording with sensors printer interface and software
- Seven days circular chart recorder (single channel)
- Software as per 21 CFR Part 11 requirements
- PLC Based Control System with HMI Touch Screen
- Biometrics Magnetic Door Access for Secured Door opening with software to maintain a log
- Validation (mapping) consists of one cycle for the temperature at any one set point for 24 hours on empty and loaded condition
- Standby Refrigeration System
- Standby Humidity System
- GSM alert through SIM card
|
Model No.
|
SC-6 Plus
|
|
internal Volume (Liters)
|
200
|
|
Number of tray
|
2
|
|
Internal Dimensions W x D x H (mm)
|
660 x 655 x 450
|
|
External Dimensions W x D x H (mm)
|
800 x 1095 x 1020
|
|
Temperature Range & Accuracy
|
10°C to 60°C, ± 1°C
|
|
Humidity Range (Rh) & Accuracy
|
40% to 95%, ± 3%
|
|
Temperature & Humidity control
|
Microprocessor with Capacitance type sensor
|
|
Display
|
4″ LCD Screen, Large size Display for ease of reading
|
|
Power Failure Alarm
|
Visual Alarm
|
|
Door Open Alarm
|
Audio Visual Alarm in case door open for over one minute
|
|
Humidity/Temperature Variation Alarm
|
Set Humidity ± 3% Rh, Set Temperature ± 1°C, Audio Visual Alarm
|
|
Illumination
|
8 Watts Fluorescent Tube
|
|
Internal Body Material
|
IStainless Steel – 316 grade
|
|
External Body Materia
|
Stainless Steel – 304 grade
|
|
Insulation
|
I70 mm minimum for Body & 80 mm for Door, CFC free polyurethane foam
|
|
Noise Level
|
Less Than 65 db(A)
|
|
Recommended Voltage Stabilizer
|
VS-04
|
Supply: 220-240 Volts, 50 Hz Single Phase.
The Remi TFT Stability Chamber (SC-6 Plus) represents the pinnacle of environmental simulation technology, specifically designed for high-compliance pharmaceutical research and advanced biotech applications. This model is distinguished by its sophisticated 7-inch high-resolution Color TFT Touch Screen Controller, which elevates user interaction and data visualization. Unlike standard LCD versions, the TFT interface provides graphical representations of temperature and humidity trends in real-time, allowing lab managers to monitor stability cycles with surgical precision. It is fully compliant with 21 CFR Part 11 requirements, featuring audit trails, multi-level password security, and encrypted data logging, making it the preferred choice for USFDA-regulated facilities.
Engineered with a robust dual-compressor refrigeration system, the SC-6 Plus TFT ensures zero downtime during long-term stability studies. The chamber is constructed with high-grade SS 304 internals and a corrosion-resistant powder-coated exterior. Its high-precision humidity sensors and steam injection systems provide a uniform climatic environment, even under full load conditions. The forced air circulation is optimized to maintain homogeneity across all shelf levels, ensuring that every sample is exposed to identical environmental stressors. With remote monitoring capabilities and Ethernet connectivity, the Remi TFT series integrates seamlessly into modern Laboratory Information Management Systems (LIMS).
Specifications
Interface Type7" Color TFT Touch Screen
Compliance21 CFR Part 11 Ready
Capacity170 Liters (6.0 cu.ft)
Temp Range10.0°C to 60.0°C
Humidity40% to 95% RH
StorageUnlimited Data Logging (USB/Ethernet)
Accuracy± 0.2°C / ± 2% RH
Shelves3 Adjustable SS Wire Shelves
Applications & Regulatory Use
Specifically utilized for accelerated, intermediate, and long-term stability testing of active pharmaceutical ingredients (APIs). It is also vital for the climatic stress testing of sensitive medical electronics, shelf-life validation of specialized food products, and biological sample preservation where data integrity and audit trails are mandatory for regulatory approval.
Technical FAQ
Q: How does the TFT model handle 21 CFR Part 11 compliance?
A: It features electronic records, non-editable audit trails, and multi-user login with unique credentials to track every change made to the system.
Q: Can I view the temperature graph directly on the screen?
A: Yes, the 7-inch TFT screen displays live trend graphs for both temperature and humidity, allowing for immediate visual verification.
Q: Is there a backup system for the water supply?
A: The chamber includes an automatic water level sensor and can be connected to a continuous DM water supply with a low-water alarm.
Q: What happens if the temperature exceeds the set limit?
A: An independent safety thermostat cuts off the heaters and triggers a visual/audible alarm to protect the samples.
Labend Product
Keywords
"Remi SC-6 Plus TFT", "Stability Chamber with Touch Screen", "21 CFR Part 11 Compliance Chamber", "Remi Electrotechnik Distributor", "Laboratory Environmental Chamber India", "Pharma Stability Testing Tool", "High End Research Chamber", "Remi TFT Stability Chamber Price", "Automatic Humidity Control Chamber", "Labend Scientific Instruments", "Stability Chamber for USFDA Compliance", "Remi SC Series TFT", "Advanced Climatic Chamber", "Pharma QA Lab Equipment", "Stability Studies ICH Guidelines", "Touch Screen Environmental Cabinet", "Remi India Exporter", "Medical Device Testing Chamber", "Stability Chamber Data Logger", "Ethernet Enabled Lab Chamber", "Industrial Stability Cabinet", "Diagnostic Research Tools"
/eh/2025-01-08/173633966714069467/picture.png)
/eh/2024-12-24/173503345348979036/Favorite-Icon.png){kind=icon}
/eh/2025-07-08/1751962110204480194/picture.png)
/eh/2025-06-21/1750485478958537574/countryInfoIcon.png)
/eh/2025-06-21/1750485741321434291/Hi-Sign-in-My-Nihao.png)
/eh/2025-06-21/1750485837193896318/cart.png)
/eh/2025-06-21/1750485968202533847/cart.png)
/eh/2025-04-17/1744862476612819675/hot-img.png)
/eh/2025-11-07/1762504524550532584/header-icon.jpg){kind=icon}
/eh/2025-07-07/1751875582852206790/header-icon.png){kind=icon}
/eh/2025-07-07/1751875587886277738/header-icon.png){kind=icon}
